Planning for Chandeliers and Multi-Bulb Vanities
For chandeliers, E12 and E26 bulbs are used. AWG 18/2 is needed, but AWG 18/5 is recommended for future-proofing. Most chandeliers are wired in parallel using 48V bulbs with E26 or E12 bases, available in 2700K, 4000K, and 3500K. Ensure the chandelier chassis is grounded.
Dimming and control options include:
- AL-WS-DR1D: Single-channel dimmer up to 36W for architectural fixtures (2023)
- AL-WS-DR2: Dual-channel dimmer up to 30W per channel for vanities/pendants (660mA)
- SRP-2305-75: Sunricher dual-channel, up to 75W per channel with DALI for individual control
- ELG-150-48DA: Meanwell single-channel up to 100W (Class 2)
| # of Bulbs | Bulb Type | Dimming | Driver | Driver Location | Switch | Wiring |
|---|---|---|---|---|---|---|
| 2-7 (or up to 12 fixed) | E12/E26 48V | 0-100% | AL-WS-DR2 | Wall switch | Built-in | Daisy Chain |
| Up to 12 | E12/E26 48V | 0-100% | SRP-2305-75 | Wall switch | Built-in | Daisy Chain |
| 12 Fixed | E12/E26 48V | 0-100% | SRP-2305-75 | LV Panel | AL-WS-8B | Home Run |
| Larger Fixtures ~150W | 48V | On/Off | ELG-150-48DA | LV Panel | AL-WS-8B | Home Run |