How to Setup the China-type DALI → DMX Converter — ATX LED

How to setup the China-type DALI → DMX converter

  1. Set the DALI switches to all down (On) except 1 (Off) → 63 devices
  2. Set the DMX switches to all up (Off) except 1 (On)
  3. Use the CMD line in the Pi to set 63 DALI addresses: DALI_Address_Assign.py
  4. Use the CMD line in the Pi to set all to dim as Fail level (Address_Set_Fail.py) – 25 is 10% output (good for egress)